MPLS VPNs transport layer 2 packets across the network and encapsulate transport protocols such as ATM, Ethernet, and SONET, allowing MPLS networks to seemlessly upgrade and replace legacy layer 2 networks without requiring network reconfiguration or using protocols higher than layer 2. In comparison, layer 3 VPNs must use the layer 3 Internet Protocol (IP).

An Internet T1 (or T-1) T1 is a symmetrical local access connection to an Internet port that allows for downloads and uploads of up to 1.5 Mega Bits Per Second (Mbps) which is 30 times as fast as a 56 Kilo Bits Per Second (Kbps) dial-up connection over a standard Plain Old Telephone Service (POTS) phone line.

Voice over Internet Protocol (VoIP) service that sets up telephone calls over the Internet that are often billed at a flat rate and leverage subscribers existing broadband Internet connection. This saves money in that only one connection is needed for both voice (phone) and data (Internet) service.

We have experience with enterprise products that include Gigabit Ethernet, OC-3, OC-12, OC-48, OC-192, OC-256, and OC-768 lines delivered over a fiber optic backbone. Call us at (888) 255-5859.

Multi-Site National and Global Network Solutions: As your organization grows, so does the importance of telecommunications integration and coordination. For example, we can design a Virtual Private Network (VPN) or Multi-Protocol Label Switching (MPLS) Network that can connect all of your locations to enable sensitive data to flow back and forth at a high speed without the risk of interception. Call us at (888) 255-5859.

Multiprotocol Label Switching (MPLS) is a data network protocol that uses Class of Service (CoS) to prioritize different types of data packets across a shared network to facilitate the convergence of voice, video and data applications.

High Speed Internet Access via Ethernet local access connects end user Ethernet local area networks (LANs) to the Internet over a metropolitan wide area networks (WANs) at speeds ranging from 1 megabit per second (Mbps) up to 1 gigabit per second (Gbps). Internet access via Ethernet is an "always on", flat-rate service that offers faster, more cost effective Internet access than is available through traditional telecommunication access technologies such as T1 / T3 or E1 / E3 connections.

Digital Subscriber Line Service (DSL) has become a very popular Internet access service. This is because DSL uses the existing copper pairs that already exist between most customer premise offices and the local phone company central office (CO). A DSL connection is set up between a DSL modem at the customer premise and a DSL access multiplexer, or DSLAM, at the phone company central office. Both voice and data can be run across the same DSL connection by using a filter to separate voice traffic from Internet traffic.

You can compare MPLS to Frame Relay and ATM technologies.

If you are looking for high-quality, up-to-date information in a simple, easy-to-use format, click on the banner below and you will be taken to the Telecom Links web site where you are always just a mouse click away from information about the telecommunication services you are looking for.

MPLS can be used to create highly-scalable IP networks with layer 2 level security as well as easy network configuration, management, and provisioning.